Cone crusher has particular structure, and it uses the acting force between the fixed cone and the moving cone to crush. Its crushing effect is good and energy consumption is low. Usually we use it to crush medium hard and super hard ore or rock, and the discharging materials’ granularity is uniform and ideal, so it is lovable to users. Cone crusher’s structure is different from others, thus it has the advantages which others don’t have. So there is its reason why it is in high position in crushing industry. So far, except for being unavailable to crush too big materials, it is applied widely. For example, it can be widely used in chemical metallurgy, construction, road construction, silicate industry mainly to medium or finely crush all kinds of materials with high hardness.
The cone crusher is able to crush medium hard and super hard materials, mainly because its working principle is perfect and it relies on the cooperation of the fixed cone and moving cone. When running, the motor drives the horizontal bearing through v belt and belt wheel, then horizontal bearing drives eccentric shaft sleeve to rotate by using the big gear and the small gear to make cone bearing doing cranking motion in the role of eccentric shaft sleeve. That can make the broken wall’s surface is near the fixed cone’ surface sometimes and away it sometimes. That can makes materials continuously extruded, broken and impacted inside crushing cavity and makes materials achieve to be crushed.After being crushed, materials can be discharged from cone crusher’s discharging opening under its own gravity. To make cone crusher crushing better, its up cavity support needs to be fixed on spherical bearing at the top of main shaft, and the down cavity needs to be linerfor outside the eccentric shaft sleeve. If that, when the equipment is running, eccentric shaft sleeve rotates around the main shaft and moving cone rotates around eccentric shaft sleeve’s axis. At the same time, it needs to rotates around itselves’ axis. The moving cone does cranking motion around its spherical support center. Inside the cone crusher, moving cone’s axis and the center line of the main shaft meet in a point, spherical center point.
Cone crusher has high market share. After all, it has the advantages other crushers have and don’t have, so its application scope is very widely. At first, cone crusher has the characteristics of wide crushing range and high producing efficiency, because it can make higher rotating speed combine with impaction perfectly. The second, low consumption of easily broken parts and low operating costs, because it has advantages in structure and takes a series of protecting measures to easily broken parts. Use laminating crushing technology to make the finished production with higher quality. The crushing cavity is designed by using intergranular laminating principle, so it can realize optional crush and improves efficiently products’ fineness ratio and cube content, and thus to reduce needle flake materials enormously . Cone crushers produced by Gongyi Xiaoyi Hongyun machinery factory adopts hydraulic protection and hydraulic clearing cavity device, so it can efficiently reduce shut-down times to make the equipment more automotive.
